[Dxbase] DXbase and VE7CC ARUser Linking

Sat Dec 23 12:25:33 EST 2006

You need to use 127.0.0.1 on port 7300 in the host file. You want to
connect to the internal local host which uses that IP. Not the public
address that the AR user connects to
Paul VE3SY
> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net 
> [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of Ted Pauck K8NA
> Sent: Saturday, December 23, 2006 11:55 AM
> To: ARUser at yahoogroups.com; dxbase at mailman.qth.net
> Subject: [Dxbase] DXbase and VE7CC ARUser Linking
>>> I have recently tried, without success, linking DXbase and 
> ARUser, like shown in the attached message below from WA9YSD. 
> I could not get DXBase to link with ARUserafter. I talked to 
> K8SIX, who only recently was able to make the link 
> successfully. Al said he had the same problems, but obtained 
> the ip host address to use in DXBase that solved the problem.
>> DXC.VE7CC.NET:7373 #VE7CC DX Spider
>> I added that line to the DXBase Host File, and then selected 
> that ip address in the DXBase User Options - Internet - IP 
> Host. The linking took place the first time that I brought up 
> the Internet Cluster Window in DXBase.
>> I don't know what the problems/reasons are, but one method 
> worked for WA9YSD and the other method worked for me!
>> 73 ... de Ted K8NA
>> **************************************************************
> **************
> Thanks every one. GOT IT FINALLY!!! DAH!
> 127.0.0.1 localhost ypoxkjlg Did NOT WORK no matter what.
>> 127.0.0.1:7300
> 127.0.0.1:7300 localhost ypoxkjlg
> 127.0.0.1:7300 localhost
> All three worked only when Logging Program Connection the Enable 
> Telenet Box is checked. I never had it checked. I keep getting Node 
> Connection Telent ticked confused. Man I hate this getting old stuff.
>> Many Thanks!!!!!!!
>>> Keep The Faith, Jim WA9YSD
>>> 73 ... de Ted K8NA
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>