[Dxbase] frequency readout

Fri Dec 15 15:04:29 EST 2006

Hello dxbasers, I have a cockpit problem! I am unable to get the correct
frequency readout from the rig. It always comes up frequency 365416.5 and
band 75gh. It has worked in the past. I have n1mm logger for contesting and
it works fine.
The setup:
Rig icom 756pro2 the rig is selected with addr of 64h
Interface via ct17 1200 n 81 dtr cts on com 3 same with n1nn
Load band/mode from transceiver is set
The mode readout is correct just frequency wrong
The rig will set the xcvr freq via spot correctly
Under radio 1 connect hf radio serial is set
The default band is set at 2
 When the 756pro2 is powered off the 2 m default is set correctly
There is a 2nd rig an ft736r but it is not connected via rs232
In the log page you can suspend the radio use, that is not set
Any ideas.? Thanks art w1rzf