[DXBase] need help from a network guru
Jim McDonald
[email protected]
Fri, 7 May 2004 20:34:24 -0700
I would probably make a bit more sense and have fewer typos if I had been
drinking a soda instead of a beer. I apologize for the extra word and
punctuation.
Jim N7US
----- Original Message -----
From: "Jim McDonald" <[email protected]>
To: "FireBrick" <[email protected]>; "DXBase List" <[email protected]>
Cc: "Lee Sawkins" <[email protected]>
Sent: Friday, May 07, 2004 8:23 PM
Subject: Re: [DXBase] need help from a network guru
Bill,
Is DXbase 2005 on computer 1 is connecting to AR User at 127.0.0.1:7300?
I don't know if it will work, but have you tried to connect from DXbase 2004
using 192.168.1.100:7300 if DXbase 2005 isn't connected? to AR User?
As far an loading the node with a second connect, the reality is it won't
ever be noticeable. To ease a guilty conscience, though, you could make the
second connection to a different node.
Why do you want to connect the second computer running 2004 if you have it
only for logs of stations that you manage?
Jim N7US
----- Original Message -----
From: "FireBrick" <[email protected]>
To: "DXBase List" <[email protected]>
Cc: "Lee Sawkins" <[email protected]>
Sent: Friday, May 07, 2004 7:41 PM
Subject: [DXBase] need help from a network guru
I run ARU on computer 1. (192.168.1.100)
DXB2005 on computer 1 connects to ARU via the local host option.
I have DXB2004 still on computer 2 (192.168.1.101)
(it's got the logs for the stations I manage and will be upgrading when I
get the time)
I would like the 04 to also access ARU via the Home LAN.
I know I can just make a connection to the node directly but that puts more
load on the
node. I may end up having to do it that way, but...this is also a learning
experience.
Both computers are in the same workgroup and can be pinged in both
direction.
In fact, if I open the little windows app. HyperTerminal and enter computer
1's ip, it
also quickly connects to ARU and the node it's connected to.
So I know two computers can connect to the same node via the software on one
of the
computers.
I'm almost there.
But I can't make DXB2004 work with it's resident Telnet program.
I've tried all sorts of IP's and port combo's.
192.168.1.100:7300 #Barton
192.168.1.100:7300
192.168.1.100
Way back when, I remembered something about not using the # or putting a
space between
them etc.
Any body got a clue? Or remember/think of something I missing?
-----------------------------------------------------
"I worry that the person who thought up Muzak may be thinking up something
else."
-----------------------------------------------------
Bill H. in Chicagoland
_______________________________________________
DXBase Reflector - Please visit us on the web at www.dxbase.com
- - - - - - - - - - - - - - - - - - - - - - -
To UNSUBSCRIBE please visit:
http://mailman.qth.net/mailman/listinfo/dxbase
_______________________________________________
DXBase Reflector - Please visit us on the web at www.dxbase.com
- - - - - - - - - - - - - - - - - - - - - - -
To UNSUBSCRIBE please visit:
http://mailman.qth.net/mailman/listinfo/dxbase