[Dxbase] Internet DX cluster

Tue Jul 6 20:34:35 EDT 2004

Hi
The command differs by the node.
I think that k4uga-node is clx.
Consult the following comment by k4uga.
http://k4uga.tsars.uga.edu/~k4uga/overview.html
SEt/FIlter <nr1,nr2,..,nrX>
This command lets you set reject filters as defined by your sysop.
You first should look up which filters are defined at your CLX node.
This is the default list:
 Filter Meaning
 -------------------------------------
 1 VHF 144.000 MHz and up
 2 HF 30.000 MHz and down
 3 TOP 1.800-2.000 MHz
 4 all the CW band segments
 5 all the SSB band segments
 6 all the RTTY band segments
 7 all the WARC bands
 -------------------------------------
Your sysop may or may not have defined further filters. You can find
out by using the SHOW/FILTERS command.
After you have decided which filters you would like to switch in, you
use the command as follows:
 SET/FILTER 4,6
This turns on the CW and RTTY filters, so will leave you only with
SSB spots. To further narrow the filter settings, you can add more
filters:
 SET/FILTER 1,3
The setting is now 1,3,4 and 6 which eliminates all spots except
SSB spots on the HF bands from 80 to 10 meters, including the WARC
bands.
At 09:12 04/07/07, JIM K2SNJ wrote:
 >
 > I am using the internet dx cluster of K4UGA. Does anyone know the command
 >to filter out all the VHF,UHF spots. I am only interested in HF dx spots.
 >
 >Jim - K2SNJ
 >
 >_______________________________________________
 >Dxbase mailing list
 >Dxbase at mailman.qth.net
 >http://mailman.qth.net/mailman/listinfo/dxbase
**JA2MNB****************************K7NB**
 YOSHI HIKO HIRANO
 CELLULAR 090-5607-0779
 FAX/TEL 0568-21-0919
---------- <BS> - Hiko_Hirano at n-sa.net ---
-- <OFFICE> - hirano at nicchuu-bussan.jp ---