[DXBase] Antenna Bearings with IOTA
David Gynn
[email protected]
2003年7月28日 13:46:23 +0100
Gentlemen
Thanks for your input. Following some testing today I find that the Rotor
control when the Summary window is in IOTA is completely erratic. For
example:-
EU068 on IOTA shows Bearing of 178.3 (Short Path) but on activating rotor
it stops at 120 degrees on Short Path which is the HF Country bearing.
EU035 on IOTA shows Bearing of 61.7 (Short Path) but on activating rotor it
stops at 225 degrees on Short Path and to 10 degrees Long Path
Jack, If you are following this thread can you issue a patch as this error
caused a great deal of problems yesterday in the IOTA contest with the
Rotor going all ways except to the correct bearing. Can I suggest whilst
doing the patch that if the Summary Window is in IOTA and a spot comes up
with no IOTA reference then the normal Country Bearing is used rather than
nothing at all when the rotor is activated ?
Many Thanks to all - It's still the best progam around.
73's
Dave (G3SBP)