[DXBase] problem printing QSO labels - feedback/comments

2003年12月27日 12:16:03 -0600

To all:
I spoke with Jim last night about the problem. And, it turned out
that the QSO's that did "not" print the QSL Via + manager were
QSO's that Jim had flagged as QSL Via Bureau.. If I recall correctly,
the addition of the QSL Via method of "MGR-Buro" came out after DXBase2002.
With the current structure of DXbase2004, any QSO that is flagged with
"Bureau" as the QSL Via method - does "not" allow the print of the
QSL Via + manager .. that is why the "MGR-Buro" was added .. flagging
the QSO's in question with "MGR-Buro" solved the problem..
The above is provided as feedback on the problem that Jim had.
73 Joe WA6AXE
Jim wrote:
> I recently upgraded from DXB 2002 to DXB 2004. I'm now encountering a 
> new problem printing QSO labels, which I have done many times.
>> For some reason, the "QSL VIA" + manager does not print on SOME labels, 
> but does print on others. Other data on the labels print as expected.
>> It does not seem to matter which .lbl file I use as a template. (The 
> same thing happens with the 5160-1q.lbl template provided with the 
> program and with another I have created.) The manager is listed in the 
> Manager Address data base, and the DX station's map to the manager is 
> entered and numbered as "1". The Labels data base shows the Route as "1".
>> What could be causing this? TIA.
>> Jim N4AL
>> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>