[DXBase] internet cluster window
Jim McDonald
[email protected]
2003年8月23日 13:33:08 -0700
Ron,
I haven't tried to start both programs simultaneously. I don't start or
stop either program very often, so it's not a problem to single click both
icons.
I start VE7CC's program (http://ve7cc.net/), where I have the Telnet box in
the Local Network section of the port setup window checked.
I changed the Hosts file in DXbase for my preferred node (mine, of course!)
to 127.0.0.1.
So, after starting VE7CC's program, I click the box to connect. In DXbase,
I just open the Internet Cluster window (I have a shortcut F-key to make it
easy), which starts the spots flowing from VE7CC's AR-User program.
I also use VE7CC to feed WriteLog, using the local IP address above in WL to
connect to AR-User. I don't need multiple node connections that DX Telnet
provides, and I can easily change the AR-Cluster parameters on the fly with
AR-User, so the node doesn't send me more spots than I need. For a RTTY
contest, I set the AR-Cluster filters to send only RTTY spots, for instance.
Jim N7US
----- Original Message -----
From: "Ron Stordahl" <[email protected]>
To: "Jim McDonald" <[email protected]>; <[email protected]>
Sent: Saturday, August 23, 2003 8:26 AM
Subject: Re: [DXBase] internet cluster window
Have you found a way to automatically start VE7CC's AR-User when you start
DXBase? This would be very convenient. AR-User could substitute for the
telnet fault in DXBase as well as provide addiitonal features and the step
of loading AR-User separately could be avoided.
Ron, N5IN
----- Original Message -----
From: "Jim McDonald" <[email protected]>
To: <[email protected]>
Sent: Saturday, August 23, 2003 10:11 AM
Subject: Re: [DXBase] internet cluster window
> I am using VE7CC's AR-User program and feeding DXbase from that. (That's
a
> snap to do, BTW, and allows me to easily configure filters in AR-Cluster.)
> I disconnected in AR-User from my node, thus terminating the telnet
> connection. The CPU usage didn't increase. Is that the scenario?
>> Jim McDonald, N7US
> Mesa, Arizona
> [email protected]
>