[DXBase] feature or anomaly
Steve Russell
[email protected]
2002年11月21日 13:41:59 -0500
Hi Bill,
I do not see it read the freq from the rig in either case. Also, it depends
on which column I'm in in the Cluster window. If I right click in the Type
column, it sets the rig to the cluster freq. Any other column simply logs
from the cluster info, like in the DX info window.
-Steve, AA3ZV
----- Original Message -----
From: "FireBrick" <[email protected]>
To: "DXBase List" <[email protected]>
Sent: Thursday, November 21, 2002 7:12 AM
Subject: [DXBase] feature or anomaly
> I think I've found a slight difference in how 'Log Current Entry' works
from
> the Cluster Window to the DX INFO Window.
>> If a cluster spot comes that you wish to work and you tune the rig to that
> frequency.
> You may or may not be exactly the same as the Cluster frequency due to
> slight errors or differences between rigs or cluster rounding.
>> You work the station.
> Now here is where the difference SEEMS to come in.
> If from the Cluster right click menu I choose 'Log Current Entry' it logs
> the entry but also changes the log AND the rig to reflect the cluster
> frequency.
> If from the DX INFO right click menu I choose 'Log Current Entry' it logs
> the entry BUT enters the frequency from the rig and does not change the
rig
> to match the cluster spot frequency.
>> This is a very minor issue but does come into play when the DX station has
> drifted or qsy'ed slightly since the cluster spot came in.
>> To me the difference between the two windows is a feature.
>> Interested to see if other users have it work this way.
> Running 2003, on a XP machine with a FT1000MP rig, fully interfaced.
>>> -----------------------------------------------------
> How do I set my LaserPrinter to "Stun"?!
> -----------------------------------------------------
>> Bill H. in Chicagoland
>> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>