[DXBase] Radio not responding, intermittent?

2002年3月27日 20:34:19 -0600

Glen
Any shielded cable will be fine, the gauge is not an issue as the current is
tiny.
It kind of irks me that Monster Cable has convinced folks that they need
gold plated cable/connectors heavy enough to power your stove.
Ron N5IN
----- Original Message -----
From: "Jack" <[email protected]>
To: "Glen Menendez" <[email protected]>; <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, March 27, 2002 7:28 PM
Subject: Re: [DXBase] Radio not responding, intermittent?
> Hi Glen,
>> Thanks for the follow up info. I'm not sure the serial cable is an issue
> unless of course there is RF getting into things. The pacing value
controls
> the speed at which successive commands are sent to the radio. Way back in
> the DOS days when we were actually trying various radios to develope that
> code, we found that all radios are not created equally, even the same
radio
> brand/model. Dunno why, but anyway, I think you're on the right path in
> playing with the value of pacing.
>> Regards,
> Jack
>> ----- Original Message -----
> From: "Glen Menendez" <[email protected]>
> To: <[email protected]>
> Cc: "'Jack'" <[email protected]>; <[email protected]>
> Sent: Wednesday, March 27, 2002 8:13 PM
> Subject: Re: [DXBase] Radio not responding, intermittent?
>>> > An initial test seems to indicate that this works!
> >
> > I notice a increased lag, but certainly something I can live with if it
> > fixes the problem. If time proves PACING=15 is successful, I will
> > experiment with intermediate values to find the lowest allowable
setting.
> > It will take some time to convince me this is the proper solution, but I
> > thought I'd post back now in case anyone else is having this trouble.
> >
> > One of the next steps I will take now that I know this is installing a
> > beefier, very well shielded serial cable. It could be a loss /
> voltage-drop
> > issue.
> >
> > Thanks!
> >
> > 73,
> >
> > Glen Menendez, K2BF
> >
> >
> > W8LU wrote:
> >
> > > I had the same problem with my Yaesu FT-1000D. I eliminated it by
> > > changing the PACING timing in the radio.ini file. I have my PACING
set
> > > to 15 and no longer experience the problem.
> > > Good luck, Ken W8LU
> > >
> > > -----Original Message-----
> > > From: [email protected]
[mailto:[email protected]]
> > > On Behalf Of Jack
> > > Sent: Wednesday, March 27, 2002 4:33 PM
> > > To: Glen Menendez; [email protected]
> > > Subject: Re: [DXBase] Radio not responding, intermittent?
> > >
> > > Hi Glen,
> > >
> > > We've heard this before. Unfortunately, we have not been able to
> > > reproduce it and so we never get the opportunity to trace through the
> > > code to see what happens. On our systems, it has never failed unless
of
> > > course we leave the radio turned off. If we can ever trap this, it
> > > would probably simple to make an adjustment in the code but until then
> > > we have nothing to go on.
> > >
> > > Regards,
> > > Jack
> > >
> > > ----- Original Message -----
> > > From: "Glen Menendez" <[email protected]>
> > > To: <[email protected]>
> > > Sent: Wednesday, March 27, 2002 1:55 PM
> > > Subject: [DXBase] Radio not responding, intermittent?
> > >
> > > > Any advice on this one?
> > > >
> > > > Occasionally, when logging DXBase will generate an error saying that
> > > > the HF radio is not responding. My rig is a FT-1000MP. It happens
> > > > only 1 out of five or six times - the rest of the time it's great.
I
> > > > don't believe this is a radio problem because when it fails, the CAT
> > > > light on the radio does not even light (no communication to radio).
> > > > As soon as I clear the error, it will usually execute the command
just
> > >
> > > > fine.
> > > >
> > > > Needless to say this can be very frustrating, especially during a
> > > > contest. Really slows down the run rate.
> > > >
> > > > Is there a known solution to this or at least a way to suppress the
> > > > error message? Would appreciate any suggestions before the contest
> > > > begins Friday.
> > > >
> > > > If it matters, OS is Win2k Pro, 1.9GHz, 1Gb DDR
> > > >
> > > > Thanks in advance.
> > > >
> > > > Glen Menendez, K2BF
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > > - - - - - - - - - - - - - - - - - - - - - - -
> > > > To UNSUBSCRIBE please visit:
> > > > http://mailman.qth.net/mailman/listinfo/dxbase
> > >
> > > _______________________________________________
> > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > - - - - - - - - - - - - - - - - - - - - - - -
> > > To UNSUBSCRIBE please visit:
> > > http://mailman.qth.net/mailman/listinfo/dxbase
> >
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
> >
>>> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>