[DXBase] W9NIU inet connection

2002年6月11日 23:55:32 -0400

I used Dos Telnet and connected to 131.156.2.135 41112
Used my call "kd4k" as "Login" and "Tony" as my password
and it worked FB.
73 de Tony, KD4K
My Weather page = http://home.adelphia.net/~tonycash
My Ham Page = http://home.adelphia.net/~tonycash/kd4k/radio.html
147.150 Repeater Page = http://home.adelphia.net/~tonycash/sawnee/
----- Original Message -----
From: "James C Samuels Jr" <[email protected]>
To: "Jack" <[email protected]>; "Tony Cash [KD4K]" <[email protected]>;
"FireBrick" <[email protected]>; "DXBase List" <[email protected]>
Sent: Tuesday, June 11, 2002 11:18 PM
Subject: Re: [DXBase] W9NIU inet connection
> Where I am now . . . . I can telnet from a DOS command prompt to
> 131.156.2.135 41112 (again w/o a colon as telneting to 131.156.2.135:41112
> fails.) I am asked for my callsign: w3bg [enter] . . . . . I get Password:
> [I just hit enter and get in].
>> I try to do this in DxBase and don't know how to handle the [Enter] in the
> user password box. I feel I am close. I attempted to add a password when
> logged on through DOS telnet, but could not . . . . seems the default is
no
> password, yet it requires an [enter] in response to the password prompt.
>> This is a good one people!
> Jim, W3BG
>> ----- Original Message -----
> From: "Jack" <[email protected]>
> To: "Tony Cash [KD4K]" <[email protected]>; "FireBrick"
> <[email protected]>; "James C Samuels Jr" <[email protected]>; "DXBase
> List" <[email protected]>
> Sent: Tuesday, June 11, 2002 10:39 PM
> Subject: Re: [DXBase] W9NIU inet connection
>>> > Interesting issue, but don't know why it is happening. Just for grins,
I
> > tried the following site and connected without any problem:
> >
> > k3nc.no.ip.com:41112
> >
> > So, the port is being used. Difference I see is the use of the literal
> > address rather than the base IP. Does anyone know the literal address
for
> > the w9niu instead of the IP?
> >
> > Jack
> >
> > ----- Original Message -----
> > From: "Tony Cash [KD4K]" <[email protected]>
> > To: "FireBrick" <[email protected]>; "James C Samuels Jr"
> > <[email protected]>; "DXBase List" <[email protected]>
> > Sent: Tuesday, June 11, 2002 9:31 PM
> > Subject: Re: [DXBase] W9NIU inet connection
> >
> >
> > > UH-OH
> > > Yep, that is what happened.
> > > Did a SH/VER and Got,
> > > PacketCluster (R) V5.4-53
> > > Copyright (c) 1986-1998, Pavillion Software
> > > Back to the drawing board.
> > >
> > > 73 de Tony, KD4K
> > >
> > > My Weather page = http://home.adelphia.net/~tonycash
> > > My Ham Page = http://home.adelphia.net/~tonycash/kd4k/radio.html
> > > 147.150 Repeater Page = http://home.adelphia.net/~tonycash/sawnee/
> > >
> > > ----- Original Message -----
> > > From: "FireBrick" <[email protected]>
> > > To: "James C Samuels Jr" <[email protected]>; "DXBase List"
> > > <[email protected]>
> > > Sent: Tuesday, June 11, 2002 9:23 PM
> > > Subject: Re: [DXBase] W9NIU inet connection
> > >
> > >
> > > > I tried:
> > > > 131.156.2.135 41112#W9NIU
> > > > 131.156.2.135 41112 W9NIU
> > > > 131.156.2.135 41112 # W9NIU
> > > >
> > > > you may have gotten tripped up. I think you connected to the old
> > Pavilion
> > > > cluster.
> > > > There is a difference in the last octet of the two ip addresses.
> > > > the old address which ends in two weeks is 131.156.2.131 and is on
> > normal
> > > > port 23
> > > > the new address ends in 135 and is on the 41112 port.
> > > >
> > > > When the normal telnet port of 23 is used, it is not necessary to
use
> > the
> > > > colon and the number, it's assumed.
> > > > Only if using a different port will you need the colon.
> > > >
> > > > ----- Original Message -----
> > > > From: "James C Samuels Jr" <[email protected]>
> > > > To: "FireBrick" <[email protected]>; "DXBase List"
> > > <[email protected]>
> > > > Sent: Tuesday, June 11, 2002 8:04 PM
> > > > Subject: Re: [DXBase] W9NIU inet connection
> > > >
> > > >
> > > > > Try leaving out the colon (just a space) in this instance. The
host
> > > table
> > > > > should contain the entry:
> > > > > 131.156.2.132 41112#W9NIU
> > > > >
> > > > > Also host prompt should contain: >, and the user connect: DXC
> > > > >
> > > > > This worked for me.
> > > > > Jim, W3BG
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "FireBrick" <[email protected]>
> > > > > To: "DXBase List" <[email protected]>
> > > > > Sent: Tuesday, June 11, 2002 7:58 PM
> > > > > Subject: [DXBase] W9NIU inet connection
> > > > >
> > > > >
> > > > > > Just for the heck of it.
> > > > > > I tried XP's little connection applet Hyperterm.
> > > > > >
> > > > > > I was able to connect instantly to:
> > > > > > 131.156.2.135 using port 41112
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > ------------------------------------------------------------
> > > > > > MOP AND GLOW - Floor wax used by Three-Mile-Island cleanup team.
> > > > > > ------------------------------------------------------------
> > > > > >
> > > > > > Bill H. in Chicagoland
> > > > > > [email protected]
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > > > > - - - - - - - - - - - - - - - - - - - - - - -
> > > > > > To UNSUBSCRIBE please visit:
> > > > > > http://mailman.qth.net/mailman/listinfo/dxbase
> > > > >
> > > > > _______________________________________________
> > > > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > > > - - - - - - - - - - - - - - - - - - - - - - -
> > > > > To UNSUBSCRIBE please visit:
> > > > > http://mailman.qth.net/mailman/listinfo/dxbase
> > > > >
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > > - - - - - - - - - - - - - - - - - - - - - - -
> > > > To UNSUBSCRIBE please visit:
> > > > http://mailman.qth.net/mailman/listinfo/dxbase
> > > >
> > >
> > >
> > > _______________________________________________
> > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > - - - - - - - - - - - - - - - - - - - - - - -
> > > To UNSUBSCRIBE please visit:
> > > http://mailman.qth.net/mailman/listinfo/dxbase
> > >
> >
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
>> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>