[DXBase] W9NIU inet connection
Tony Cash [KD4K]
[email protected]
2002年6月11日 21:31:00 -0400
UH-OH
Yep, that is what happened.
Did a SH/VER and Got,
PacketCluster (R) V5.4-53
Copyright (c) 1986-1998, Pavillion Software
Back to the drawing board.
73 de Tony, KD4K
My Weather page = http://home.adelphia.net/~tonycash
My Ham Page = http://home.adelphia.net/~tonycash/kd4k/radio.html
147.150 Repeater Page = http://home.adelphia.net/~tonycash/sawnee/
----- Original Message -----
From: "FireBrick" <[email protected]>
To: "James C Samuels Jr" <[email protected]>; "DXBase List"
<[email protected]>
Sent: Tuesday, June 11, 2002 9:23 PM
Subject: Re: [DXBase] W9NIU inet connection
> I tried:
> 131.156.2.135 41112#W9NIU
> 131.156.2.135 41112 W9NIU
> 131.156.2.135 41112 # W9NIU
>> you may have gotten tripped up. I think you connected to the old Pavilion
> cluster.
> There is a difference in the last octet of the two ip addresses.
> the old address which ends in two weeks is 131.156.2.131 and is on normal
> port 23
> the new address ends in 135 and is on the 41112 port.
>> When the normal telnet port of 23 is used, it is not necessary to use the
> colon and the number, it's assumed.
> Only if using a different port will you need the colon.
>> ----- Original Message -----
> From: "James C Samuels Jr" <[email protected]>
> To: "FireBrick" <[email protected]>; "DXBase List"
<[email protected]>
> Sent: Tuesday, June 11, 2002 8:04 PM
> Subject: Re: [DXBase] W9NIU inet connection
>>> > Try leaving out the colon (just a space) in this instance. The host
table
> > should contain the entry:
> > 131.156.2.132 41112#W9NIU
> >
> > Also host prompt should contain: >, and the user connect: DXC
> >
> > This worked for me.
> > Jim, W3BG
> >
> > ----- Original Message -----
> > From: "FireBrick" <[email protected]>
> > To: "DXBase List" <[email protected]>
> > Sent: Tuesday, June 11, 2002 7:58 PM
> > Subject: [DXBase] W9NIU inet connection
> >
> >
> > > Just for the heck of it.
> > > I tried XP's little connection applet Hyperterm.
> > >
> > > I was able to connect instantly to:
> > > 131.156.2.135 using port 41112
> > >
> > >
> > >
> > >
> > > ------------------------------------------------------------
> > > MOP AND GLOW - Floor wax used by Three-Mile-Island cleanup team.
> > > ------------------------------------------------------------
> > >
> > > Bill H. in Chicagoland
> > > [email protected]
> > >
> > >
> > >
> > > _______________________________________________
> > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > - - - - - - - - - - - - - - - - - - - - - - -
> > > To UNSUBSCRIBE please visit:
> > > http://mailman.qth.net/mailman/listinfo/dxbase
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
> >
> >
>>> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>