[DXBase] Kenwood TS-2000 users.

2002年12月28日 23:20:19 -0500

Brendon,
Sorry but no cigar.
This inserted into my Radios.ini file (in place of the TS-2000 portion)
only causes the TS-2000 to blink at me when clicking on a spot.
No frequency change, no mode change on either VFO.
Back to the drawing board.
I do have a version of the Radios.ini file that I am now testing and so far
it is working fine (hope it keeps it up)
73 de Tony, KD4K
My Weather Page
http://home.adelphia.net/~tonycash/
My Ham Radio Page
http://home.adelphia.net/~tonycash/kd4k/radio.html
Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page
http://home.adelphia.net/~tonycash/sawnee/index.html
----- Original Message -----
From: "Brendan Minish" <[email protected]>
To: "Phil ON4VP" <[email protected]>; <[email protected]>
Sent: Saturday, December 28, 2002 10:54 AM
Subject: Re: [DXBase] Kenwood TS-2000 users.
> I may have the answer to this one.
>> DXB 2003 sends the mode before the frequency when setting the radio, in
> some radios (like the elecraft k2 which uses the kenwood command set) that
> remember last used mode on a per band basis, this will on occasion cause
> the wrong mode to be set because the software sets the VFO mode on the
band
> it is just LEAVING (hence the U in CW) and tunes to the new band with
> whatever mode was last used on that band.
>> Some radios apparently need the commands sent in this order so it's not
> really a bug.
>> The fix is easy, you simply have to include the mode set command at the
end
> of the frequency set line and set the mode set command to Null, the mode
> set command is never sent to the radio without also setting the frequency
> so including the mode set Command in the VFO set line won't break
anything.
>> Here is an extract from my file for the Elecraft K2 It may need some
> modifying for the TS2000 but hopefully you get the idea.
> showing how I have configured the radios.ini file to make it work
correctly
> with the K2
>>> SelectVFOA= eoc(100) asc( "FR0;" ) eoc(0)
> SetVFOA= asc( "FA" ) dec( %vfoa,11 ) asc( ";" ) asc("MD") dec( %mode,1)
asc
> ( ";" ) eoc(0)
> GetVFOA= asc("FA;") rrs(14) eoc(0)
> PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0)
>> SelectVFOB= eoc(0)
> SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0)
> GetVFOB= asc("FB;") rrs(14) eoc(0)
> PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0)
>> SetMode= eoc(0)
> GetMode= asc( "IF;" ) rrs(38) eoc(0)
> PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";")
eoc(0)
>> I have put the entire K2 file at the very bottom of this e-mail for
> reference, NOTE there are no line breaks in the middle of lines.
> The K2 runs very happily here with pacing set to 1 and EOC(0) which makes
> for very fast responses to commands, Perhaps the ts200 can use similar
fast
> timings as it sure speeds things up.
>> The eoc(100) in the first line
> SelectVFOA= eoc(100) asc( "FR0;" ) eoc(0)
> cures a 'radio not responding ' problem that crops up sometimes under
win2k
> on my machines.
>>> 73
> Brendan EI6IZ
>> At 07:31 22/12/2002 +0100, Phil ON4VP wrote:
> >same here Tony, also having the two 'U's sent but mode not changed.
> >here intel PIII/1000, 512 Mb, XP pro, radio on com 2
> >
> >Phil ON4VP
> >
> >----- Original Message -----
> >From: "Tony Cash" <[email protected]>
> >To: "Al Bailey" <[email protected]>; <[email protected]>
> >Sent: Friday, December 20, 2002 6:07 AM
> >Subject: Re: [DXBase] Kenwood TS-2000 users.
> >
> >
> > > I just tried your exact spot and baud between computer and the radio
> > > and it DOES NOT work here. VFO B mode never changes. The radio
> > > sends a U twice just like it should when changing both VFO's to USB
> > > but VFO B does not change. I agree with Clark, This may be a problem
> > > in the particular "order" in which the commands are sent.
> > > My setup is as follows
> > > Intel pentium IV 2.4 GHz.
> > > 512 meg. memory
> > > Radio on Com 1
> > > Operating system is XP Home
> > >
> > > 73 de Tony, KD4K
> > >
> > > My Weather Page
> > > http://home.adelphia.net/~tonycash/
> > > My Ham Radio Page
> > > http://home.adelphia.net/~tonycash/kd4k/radio.html
> > > Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page
> > > http://home.adelphia.net/~tonycash/sawnee/index.html
> > >
> > > ----- Original Message -----
> > > From: "Al Bailey" <[email protected]>
> > > To: <[email protected]>
> > > Sent: Thursday, December 19, 2002 11:49 AM
> > > Subject: [DXBase] Kenwood TS-2000 users.
> > >
> > >
> > > > I noticed some users are having problems with DXBase 2003 and the
> > > > Kenwood TS-2000. I decided to try using a spot which incorporated
> > > > both VFO's and this is the spot I used.
> > > >
> > > > VE3WQ 28496.7 TI9JJP qsx 28501 Cocos Is 1411 19
Dec
> > > >
> > > >
> > > > Once I clicked on it both VFO's responded as they are supposed to.
In
> > > > VFOa I had 28496.7 USB and VFOb I had 28501.0 USB which is exactly
> > > > as it is supposed to do. Prior to the spot I had 50125.0 in VFOa and
in
> > > > VFOb I had 432.100 FM.
> > > >
> > > > I am using a Lavaport serial board and COM:3 with settings of 4800
baud
> > > > No parity, 8 bits and 2 stop bits. I have also went into my Kenwood
> >TS2000
> > > > and set the baud rate using Menu Number 56 to 4800 baud.
> > > >
> > > > My operating system is Windows 98SE and the PC is a Gigabyte
GA-8HIXP
> > > > and Intel Pentium IV at 2.4 gig.
> > > >
> > > > I hope this helps others clear this up but from where I am sitting I
see
> > > no
> > > > problem with DXBase regarding rig control with the TS2000X.
> > > >
> > > > Best wishes for the holidays and best 73 de K8SIX
>>> The K2 file
>> [ELECRAFT_K2]
> #Elecraft K2 revision 0.3 by Brendan Minish [email protected]
> P_LSB=1
> P_USB=2
> P_CW_USB=0
> P_CW_LSB=0
> P_AM=5
> P_FM=4
> P_FM_N=0
> P_DATA_LSB=0
> P_DATA_USB=0
> P_DATA_FM=0
> P_CW=3
> P_FSK=6
> P_RTTY=6
> P_PACKET=9
>> LSB=1
> USB=2
> CW=3
> FM=4
> AM=5
> FSK=6
> RTTY=6
> HIGH=3
> MEDIUM=2
> LOW=1
> OFF=0
> ON=1
>> FREQDIVIN=1
> FREQDIVOUT=1
> USEEXTENDEDMODES=0
> FREQSHIFT=0
> PACING=1
>> DefaultCW=3
> DefaultAM=5
> DefaultFSK=6
> DefaultRTTY=6
> DefaultFM=4
>> SelectVFOA= eoc(100) asc( "FR0;" ) eoc(0)
> SetVFOA= asc( "FA" ) dec( %vfoa,11 ) asc( ";" ) asc("MD") dec( %mode,1)
asc
> ( ";" ) eoc(0)
> GetVFOA= asc("FA;") rrs(14) eoc(0)
> PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0)
>> SelectVFOB= eoc(0)
> SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0)
> GetVFOB= asc("FB;") rrs(14) eoc(0)
> PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0)
>> SetMode= eoc(0)
> GetMode= asc( "IF;" ) rrs(38) eoc(0)
> PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";")
eoc(0)
>> SetFilter= asc("K22;") asc( "FW0000" ) dec( %filter, 1 ) asc ( ";" )
eoc(0)
> GetFilter= asc("K22;") asc( "FW;" ) eoc(0)
> PrsFilter= asc("FW") dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0)
>> SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0)
> GetSplit= asc( "IF;" ) rrs(38) eoc(0)
> PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";")
eoc(0)
>>> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>