[DXBase] locator = distance + heading
Jack
[email protected]
2002年12月10日 06:28:23 -0500
Phil,
In the screen shot that you sent, you have the Summary Window set to VHF
Grids... ok
The QSL Info window is open... ok
A grid was entered in the log and displayed in the Summary Window... ok
But, the Frequency entered was 7077.00/CW which is a 40 meter HF frequency?
not ok
Grid functionality in DXbase applies to the vhf/uhf bands, not the HF bands.
Regards,
Courtney
----- Original Message -----
From: "Phil ON4VP" <[email protected]>
To: <[email protected]>
Sent: Tuesday, December 10, 2002 12:06 AM
Subject: Re: [DXBase] locator = distance + heading
> Hi,
>> No this qsl info window is open all time.
> I can't send a screenshot to this reflector it will be removed.
> 73 Phil
>> ----- Original Message -----
> From: "Jack" <[email protected]>
> To: "Phil ON4VP" <[email protected]>; <[email protected]>
> Sent: Monday, December 09, 2002 8:03 PM
> Subject: Re: [DXBase] locator = distance + heading
>>> > Phil,
> >
> > Is it possible that you have "closed with an X" the QSL Info window,
> instead
> > of minimizing it? The data that feeds the Summary window originates
from
> > the QSL info window. If you have closed it, then certain features in
the
> > Summary window will not operate. If you don't want to see the QSL Info
> > window, then minimize it.
> >
> > There is only one version of DXbase 2003... hihi....
> >
> > Regards,
> > Courtney
> >
> > ----- Original Message -----
> > From: "Phil ON4VP" <[email protected]>
> > To: <[email protected]>
> > Sent: Monday, December 09, 2002 1:09 PM
> > Subject: Re: [DXBase] locator = distance + heading
> >
> >
> > > Well, when I enter a locator in my grid 'log' and go to the next
field,
> > > nothing happens, not in the summary window, nowhere, and yes, VHF
grids
> is
> > > selected ... STRANGE isn't it
> > >
> > > I start to believe I have a ghost version of dxbase 2003, because most
> of
> > > you guy's get cw keying to work, labeling sorting great and grids ok,
> > > nothing here so far.....
> > >
> > > ----- Original Message -----
> > > From: "Jack" <[email protected]>
> > > To: "Phil ON4VP" <[email protected]>; <[email protected]>
> > > Sent: Monday, December 09, 2002 1:11 PM
> > > Subject: Re: [DXBase] locator = distance + heading
> > >
> > >
> > > > Phil,
> > > >
> > > > Did you by chance try changing the Summary Window using the drop
down
> > > arrow
> > > > in the Summary window to the category VHF Grids? In our version,
when
> > we
> > > do
> > > > this and enter a grid in the log, then click on the next field of
the
> > same
> > > > record, the grid is displayed in the Summary window along with the
> beam
> > > > heading and distance.
> > >
> > >
> > >
> > > _______________________________________________
> > > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > > - - - - - - - - - - - - - - - - - - - - - - -
> > > To UNSUBSCRIBE please visit:
> > > http://mailman.qth.net/mailman/listinfo/dxbase
> >
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
> >
> >
>>> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>