[DXBase] TS-850 and RIGBLASTER PLUS sending CW
WW3S
[email protected]
Mon, 2 Dec 2002 20:32:09 -0500
Sean, this sounds like the same problem you had on the N1MM list. If you are
using keying on DTR, you need to be connected to the key in jack on the rear
of the the rig, not the mic input, and you need to make sure the internal
keyer is disabled. When you get this working, it should work the same no
matter what program you use as long as all use keying on DTR. Now if they
use keying on TXD or RTS, DO NOT CHANGE ANY CONNECTIONS BETWEEN THE
RIGBLASTER AND YOUR 850...instead, open the rigblaster and change the jumper
to the appropriate (TXD or RTS) setting. I think there may be a few,
although I'm not aware of the names, that use some sort of cw thru the mic
port, but for the most part, if you are utrying to send cw with your pc,
connect to the key in jack ( and remember, disable the internal keyer)
73 Jamie
----- Original Message -----
From: Sean Fleming <[email protected]>
To: Jack <[email protected]>; Sean Fleming <[email protected]>;
<[email protected]>
Sent: Monday, December 02, 2002 8:08 PM
Subject: Re: [DXBase] TS-850 and RIGBLASTER PLUS sending CW
>> Jack,
>> I am using the dtr, dts keying into the micrphone jack just as though I am
sending psk31. that is one option then I have what is called direct keying.
there PTT is activated by DTR and/or RTS.
>>>> Visit my Web Home @ http://www.k8khz.com
>> Send me an Instant message
>> get Yahoo Messenger at http://www.messenger.com.
>>> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>