Re(2): [Antennas] quagi vs yagi at vhf

Fri Dec 1 12:48:13 EST 2006

But with a wood boom don't the antenna characteristics change when it
rains & soaks the wood?
David
W7DBH
Mobile in Oregon
>>However, it is important to note that the original quagi design by Wayne
>Overbeck is for a wooden boom with the elements passing through the boom.
>Tests have shown that the performance and charactersitics of the quagi is
>affected a lot when the boom material is changed to metal. The element
>lengths and spacing have to be recalculated to achive the same results as
>the wooden boom quagi and I have not seen a metal boom quagi which rivals
>the original wooden boom.
>>Deon ZS1ZL
>>----- Original Message ----- 
>From: "Bob Stein" <hamstuff at sbcglobal.net>
>To: "G B" <microsys at alltel.net>
>Cc: "Antennas" <antennas at mailman.qth.net>
>Sent: Thursday, November 30, 2006 12:42 AM
>Subject: Re: [Antennas] quagi vs yagi at vhf
>>>For a given boom length, there should be no appreciable difference in gain
>between a Yagi and quagi. Gain is a function of boom length, and has
>nothing
>to do with the driven element if both designs are optimized. There may be
>slight differences in the side lobes, but I can't really say.
>>Bob, w6nbi
>>>G B wrote:
>> Hello,
>>>> I have been searching the internet for a study on long boom vhf quagis
>> when
>> compared
>> to long boom yagis. I could not find anything.
>>>> One of the EU guys who is famous for vhf yagis told me he did not think
>> loops worked
>> very well. That is contrary to my experience, but, mainly, I find
>quagis
>> easy to
>> construct and they are inexpensive. I have compared the 8 element quagi
>> here to two
>> different colinear verticals which claim to have 6dbd and 8dbd
>> respectively,
>> which are
>> located well above the quagi. The quagi is at least one, and many times
>> two
>> S units
>> better.
>>>> Anyway, I am considering building a twenty foot boom yagi using a T
>match
>> and insulated
>> elements for sideband.
>>>> I would sure like to see hard evidence on a test range.
>>>> As a side query, I know I can find those stainless keepers for the 3/16"
>> elements on a couple
>> websites, but: Where do they get them from?
>>>> As an example, the 'insulators' they sell for the elements go for 0ドル.20
>to
>> 0ドル.35 each. They are
>> just shoulder washers, and I found some for 0ドル.01 each. So, I figured
>> these
>> keepers have an
>> official industry name, but cannot find one. I am expecting that
>several
>> of
>> our local club
>> members are going to build some of these antennas, and we will need some
>> quantity.
>>>> Thanks for listening...
>> 73
>>>> Glen K4KV
>>>>>> ______________________________________________________________
>> Antennas mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/antennas
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Antennas at mailman.qth.net
>>>> __________ NOD32 1888 (20061128) Information __________
>>>> This message was checked by NOD32 antivirus system.
>> http://www.eset.com
>>>>>>>>>>______________________________________________________________
>Antennas mailing list
>Home: http://mailman.qth.net/mailman/listinfo/antennas
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:Antennas at mailman.qth.net
>>>______________________________________________________________
>Antennas mailing list
>Home: http://mailman.qth.net/mailman/listinfo/antennas
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:Antennas at mailman.qth.net
>