[Antennas] Radio switch

Fri Oct 29 10:57:39 EDT 2004

If the antenna switch provides enough isolation, it wont...the Dowkey
SHOULD work ok...
No different than the sep TX RX units of the past with an external
antenna switch...if the relay can, it would help to make sure the UNUSED
side of the relay is grounded out or shorts to gnd...that way, the
inactive radio input does not overload.
Chris
WB5ITT
> -----Original Message-----
> From: antennas-bounces at mailman.qth.net 
> [mailto:antennas-bounces at mailman.qth.net] On Behalf Of KØCQW
> Sent: Thursday, October 28, 2004 4:17 PM
> To: Antennas at mailman.qth.net
> Subject: [Antennas] Radio switch
>>> Looking for input on this one, I plan to have two 
> transceivers connected 
> to one antenna system with a 12volt
> Dowkey relay.
>> If both *transceivers where on and on the same band and one was 
> transmitted with would it damage the other **transceiver?
>> Any other way of doing this?
>