[Antennas] need mobile antenna help...

Fri, 9 May 2003 01:07:08 -0700

Okay,
 Again, I'd look at the Radio Shack mount that they are getting rid of.
The top is ~1 1/2" or so, kind of a
tapered cone with a 3/8-24 thread in the top. It's made to drop into a hole
that's a little bigger than 5/8" because
the bottom is basically a SO239 connector with a 5/8 fender washer and nut.
You screw on your PL259 on the
bottom. These things aren't listed on their web page but in the stores there
discounted because they are dropping
them out of their line. There somewhere around 8ドル now. It should fill the
hole and you can run a Hustler SF-2
Buck Buster 5/8 wave or a CG144 5.2 DB collinear and still be able to change
it out for a Ham stick for HF
if you want to,.
Mike
----- Original Message ----- 
From: "Rob Matherly" <[email protected]>
To: <[email protected]>
Sent: Thursday, May 08, 2003 10:49 PM
Subject: Re: [Antennas] need mobile antenna help...
> On Thu, 2003年05月08日 at 15:31, John Brown wrote:
> > Is the hole on top of the fender (like most Fords) or on the side of the
> > fender.
> > What size is the hole and can it be accessed easily from the backside of
the
> > fender?
>> I guess I shoulda been more specific :^)
>> Here's all the info: It's a 1986 full-size Chevy Blazer. There wasn't
> originaly a hole there, someone drilled it (and apparently widened it
> with a file). It appears to be larger than 3/4". It's on top of the
> fender, and it's flat all around (for the most part). There's some
> holes in the backside of the fender where I can reach in, but the
> movement is kinda limited.
>> -- 
> 72/73/oo - Rob, w0jrm
> http://members.iowasocean.com/jimrob - [email protected] - AIM: w0jrm
> "I don't like noises... especially when there ain't supposed to be any"
>> - - -
>> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
> _______________________________________________
> Antennas mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/antennas