[Antennas] ANTENNA INFO - Criticism of poor manufacturing practices...

2003年6月08日 15:09:54 -0400

With the comments on Cushcraft indicating poor quality, which manufacturer
would you go to for a small 440Mhz or 440Mhz/144Mhz combo yagi? I don't need
a lot of gain for local repeater use.
Pat
wa4tuk
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of W1GOR
> Sent: Sunday, June 08, 2003 12:29 PM
> To: Gary Smith; [email protected]
> Subject: [Antennas] ANTENNA INFO - Criticism of poor manufacturing
> practices...
>>> Gary,
>> I fully understand your comments regarding Cushcraft's poor
> quality control.
> I suppose that it was your apology that triggered my response. It seems
> that people in general tend to apologize for their negative comments. My
> advice is for everyone to make their comments, and criticisms without
> feeling the need to feel guilty for making those comments. If
> you feel that
> a product is badly designed, constructed, or, in some way fails
> to meet your
> personal standards, publicize it through these reflectors. You are
> providing valuable feedback for those of us who may be considering the
> purchase of the very product that you are dissatisfied with.
> Your comments
> will most likely result in further consideration before any cash
> transactions take place.
>> If the product is good, say so... and add as much positive feedback as
> possible to substantiate your claims. If the product is not to your
> satisfaction, publish the details to give other buyers something to think
> about. Regarding Cushcraft, I have owned several different antennas and
> have found, over the past 25 to 30 years, that their quality control has
> been deteriorating. My earlier Cushcraft VHF beams were furnished with
> small amounts of extra hardware, just in case you drop that critical screw
> in the tall grass... These days, consider yourself lucky if all of the
> hardware is in the bag, and nothing that cannot be locally replaced is
> missing.
>> No need to be sorry for your comments... I, for one, value them quite
> highly...
>> 73, Larry - W1GOR
>>> ----- Original Message -----
> From: "Gary Smith" <[email protected]>
> To: "David S McCallum" <[email protected]>; <[email protected]>
> Sent: Saturday, June 07, 2003 21:11
> Subject: Re: [Antennas] ANTENNA INFO
>>> > Hi David,
> >
> > I have the Cushcraft and it's a piece of junk. When I
> > bought it, the first thing I noticed was the poor
> > construction. Burrs on the tubing, aluminum chips all
> > over everything in the box. The assembly was
> > straightforward, but tuning it was a bear. I used one
> > of the MFJ meters to tune it and was never able to get
> > it to resonate the way it should. I use a local 2m
> > repeater on 147 Mhz and run about a 3:1 SWR because
> > the antenna won't go any lower.
> >
> > Sorry to be critical of Cushcraft but, in my opinion,
> > they have really slipped in the quality arena over the
> > past 5 years. You'd be better off building a j-pole
> > antenna from 1/2" copper tubing. I have one of those
> > that I built for about 20,ドル and it really kicks butt.
> >
> > Hope this helps.
> >
> > 73 es gd DX,
> >
> > Gary
> > WA1TJB
>>> - - -
>> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
> _______________________________________________
> Antennas mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/antennas
>