[Antennas] Tuning Jpole question

2003年1月27日 2:26:27 -0600

Leave it alone. SWR is acceptable. Questions, see :Reflections by Naxwewell. Antennas ny Kraus. 73, Ron W2WU, BE
>> From: Steve Holm <[email protected]>
> Date: 2003年01月25日 Sat PM 09:22:14 CST
> To: [email protected]
> Subject: Re: [Antennas] Tuning Jpole question
>> Sorry Paragraph change:
>> i.e. @ 144 mHz, 1/4 wave = 19 1/2 inches
> @ 148 mHz, 1/4 wave = 18.98 inches.
>> That is ONE INCH difference in electrical length right
> there. 
>> Should read ONE HALF INCH.
> Sorry didn't pass math 101 !!
> Steve
>>>> --- Daniel Boyer <[email protected]> wrote:
> > I just put up my first elevated external
> > antenna... A 3/4" copper
> > pipe Jpole for 2m operation... I tried about 15-20
> > different position
> > for the coax connection points and got it set at the
> > point which gave
> > the best overall swr. The results are that I have
> > an SWR of <1.1
> > measured at 144.010mhz and an SWR of 1.7 at 147.990.
> > If I move the
> > contact points up, the swr goes up across the board,
> > move the contacts
> > down and the swr goes up across the board. My
> > question is what should I
> > do to move the low swr more towards the middle of
> > the band or just lower
> > it overall? Do I need to chop some pipe off of the
> > main element or off
> > of the stub or something similar?
> > Thanks
> > Daniel
> > KC9DAG
> > 
> > - - - 
> > 
> > Your moderator for this list is:
> > Larry Wilson KE1HZ [email protected]
> > _______________________________________________
> > Antennas mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/antennas
>>> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
> - - - 
>> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
> _______________________________________________
> Antennas mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/antennas
>