[Antennas] Q
Douglas J. Koehler
[email protected]
2002年10月12日 11:42:57 -0500
Q of an inductor is defined as the inductive reactance at a specific
frequency divided by the coil's internal resistance.
A coil having 200 ohms of reactance and 100 ohms of internal resistance
would have a Q of 2 (200/100 = 2)
If you are given is the inductor's value and the operating frequency, you
must calculate the reactance by X=2*(pi)*f*L.
For a 75 microHenry coil at 3.5 MegaHertz with 60 ohms of internal
resistance you would calculate it thus:
First find the reactance: X = 2*(pi)*3500000*.000075 = 1649.3
Then divide by the resistance: Q = 1649.3 / 60 = 27.47
For resonant circuits, Q is defined as the resonant frequency divided by
the bandwidth, bandwidth being defined as the half-power (-3db) points on
either side of the resonant frequency.
Thus a coil resonant at 450 MHz whose half power points are 449 and 451 MHz
will have a bandwidth of 2 MHz (451-449 = 2) and a Q of 225 (450/2 = 225)
At 10:58 AM 10/12/2002, you wrote:
>Where do I find a good definition and explanation of "Q"?
>>WD8OKN
>Michigan
>>________________________________________________________________
>GET INTERNET ACCESS FROM JUNO!
>Juno offers FREE or PREMIUM Internet access for less!
>Join Juno today! For your FREE software, visit:
>http://dl.www.juno.com/get/web/.
>- - -
>>Your moderator for this list is:
>Larry Wilson KE1HZ [email protected]
>_______________________________________________
>Antennas mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/antennas