[Antennas] Fasteners
Mark
Mark <[email protected]>
2002年6月25日 18:44:38 -0700
Yeah, kinda agree with that .. just don't wanna see torch onna tower...
6dx
----- Original Message -----
From: "Mike J Maloney" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>; <[email protected]>; <[email protected]>
Sent: Tuesday, June 25, 2002 6:37 PM
Subject: Re: [Antennas] Fasteners
> Nah, just snap em off with a socket and 1/2" rachet bar. Drive out of
> their holes with a 1/4" pin punch. The little ones break much easier than
> the 1/2" 316 Stainless bolts and nuts! For them, use a 3/4" rachet
> or breakover bar, or pnuematic torque driver like the tire shops use.
> Advise wearing gloves and safety glasses for any of above.
>> Mike
>> On 2002年6月25日 18:17:57 -0700 Mark <[email protected]> writes:
> > Air powered cut-off tool way to go for nasty tower bolts / nuts .. .
> > NOT
> > torch! Trust me on this one! Mark 6dx
> >
> >
> > Almost every tower
> > > > will
> > > > eventually need to come down. It's easier to unscrew a bolt
> > than
> > > > cut it
> > > > with a torch!
>