Port-arm archive
[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index][
Old Index]
Re: [Fwd: NSLU2 builds and boots, but seems to disappear when running /sbin/init]
rtos wrote:
This is not the right kernel. I lost my partition and I will have to
reproduce the steps on my machine before I can provide the details.
To give you and idea, you have to copy what is being done for targets
like ADI_BRH. Take a look at files like
distrib/evbarm/instkernel/instkernel/Makefile
and /usr/src/sys/arch/evbarm/conf/ADI_BRH_INSTALL and do the same for
NSLU2. Just grep for ADI_BRH.
I would start by doing a build release and looking at what files are
generated for ADI_BRH. Then try and make the slug look the same. My
kernel refused to work (couldn't find the filesystem) until I enabled:
options FFS_EI # FFS Endian Independant support
Following rtos' suggestion, I created one new file:
~/usr/src/sys/arch/evbarm/conf/NSLU2_INSTALL
# $NetBSD: NSLU2_INSTALL
# based on ADI_BRH_INSTALL,v 1.1 2003年04月08日 20:49:01 thorpej Exp $
#
# NSLU2_INSTALL -- NSLU2 kernel with installation-sized
# ramdisk
#
include "arch/evbarm/conf/NSLU2"
include "arch/evbarm/conf/INSTALL"
and patched two others:
--- distrib/evbarm/instkernel/instkernel/Makefile.orig 2006年11月08日
22:03:15.000000000 -0500
+++ distrib/evbarm/instkernel/instkernel/Makefile 2008年01月25日
10:27:44.000000000 -0500
@@ -18,7 +18,8 @@
TEAMASA_NPWR_INSTALL ${RAMDISK} -
.else
# Big endian platforms.
-MDSETTARGETS= ADI_BRH_INSTALL ${RAMDISK} -
+MDSETTARGETS= ADI_BRH_INSTALL ${RAMDISK} - \
+ NSLU2_INSTALL
${RAMDISK} -
.endif
MDSET_RELEASEDIR= installation/instkernel
--- etc/etc.evbarm/Makefile.inc.orig 2007年07月25日 23:13:52.000000000 -0400
+++ etc/etc.evbarm/Makefile.inc 2008年01月25日 11:57:49.000000000 -0500
@@ -13,7 +13,7 @@
TEAMASA_NPWR TS7200 TWINTAIL
.else
# Big endian platforms
-EVBARM_BOARDS= ADI_BRH
+EVBARM_BOARDS= ADI_BRH NSLU2
.endif
.for board in ${EVBARM_BOARDS}
I also changed the NSLU2 configuration file to include the FFS_EI option
and rebuilt the kernel, build, and release targets. I loaded the file
"netbsd-NSLU2_INSTALL.bin" onto the tftp server, and lo and behold:
RedBoot> load -r -b 0x200000 netbsd-NSLU2_INSTALL.bin
Using default protocol (TFTP)
Raw file loaded 0x00200000-0x007b36b3, assumed entry at 0x00200000
RedBoot> g
[ Kernel symbol table missing! ]
pmap_postinit: Allocated 9 static L1 descriptor tables
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.49 (NSLU2_INSTALL) #0: Fri Jan 25 12:19:11 EST 2008
hayford@debian:/home/hayford/usr/src/sys/arch/evbarm/compile/obj/NSLU2_INSTALL
total memory = 32768 KB
avail memory = 24028 KB
mainbus0 (root)
[...snip...]
Welcome to sysinst, the NetBSD-4.99.49 system installation tool. This
menu-driven tool is designed to help you install NetBSD to a hard disk, or
upgrade an existing NetBSD system, with a minimum of work.
In the following menus type the reference letter (a, b, c, ...) to
select an
item, or type CTRL+N/CTRL+P to select the next/previous item.
The arrow keys and Page-up/Page-down may also work.
Activate the current selection from the menu by typing the enter key.
If you booted from a floppy, you may now remove the disk.
Thank you for using NetBSD!
lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x NetBSD-4.99.49 Install System x
x x
x>a: Install NetBSD to hard disk x
x b: Upgrade NetBSD on a hard disk x
x c: Re-install sets or install additional sets x
x d: Reboot the computer x
x e: Utility menu x
x x: Exit Install System x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
[...snip...]
The installation option got as far as trying to partition/label the
thumb drive, but failed with the message:
Status: Command failed
Command: disklabel -w -r -f /tmp/disktab sd0 'NETBSD-NSLU2'
Hit enter to continue
--------------------------------------------------------------------------------
disklabel: partition b: partition extends past end of unit
But, I've been having problems with disklabel even when booting from
NFS, so I'm not sure that means anything. It would appear that rtos'
method does work.
The saga continues...
Thanks for the help, Don
Home |
Main Index |
Thread Index |
Old Index