1024#

Wed Oct 7 11:36:01 CEST 2009

David Garabana Barro a écrit :
> On Wednesday 07 October 2009 10:57:02 Christ van Willegen wrote:
>>> Hi,
>>>> On Wed, Oct 7, 2009 at 10:50 AM, Ivan Shirokov <ivanshirokoff at gmail.com> 
>>> wrote:
>>>> I've been wondering if all the freerunners are affected by bug #1024?
>>>>> No, not all FR are affected, AFAIK
>>>> I've been wondering the same thing...
>>>> It would seem that the extra current draw in suspend would affect all
>> FRs, so having a #1024 fix-party would be a good idea in any case (?).
>>>> #1024 is not causing extra current drain, but the software solution to this 
> bug:
> Not allowing Calypso entering deep sleep mode.
>> You can check if your FR is suffering from #1024 editting /etc/frameworkd.conf 
> and changing 
>> ti_calypso_deep_sleep = never
>> to
>> ti_calypso_deep_sleep = always
>> then restarting framework:
>> /etc/init.d/frameworkd restart
>> After doing so, if your FR suffers from this bug, your modem will continuously 
> register/unregister from GSM network when suspended, and you will lose calls
>> On my case, it was nearly impossible to call FR when suspended + calypso deep 
> sleep.
>> But not all FR suffer from this bug. You should try it after fixing it.
>>Most of GTA02-A5/A6 have this bug.
Once TI_CALYPSO_DEEP_SLEEP set to "always", you can check with a little 
script done by KaZEr (see bleow)
Launch it on screen, and redirect output to a file.
If you have something like
[2009年09月09日 12:36:09.189663] Signal : cid=3BB3, lac=0D48
[2009年09月09日 12:36:15.088936] Signal : cid=3BB3, lac=0D48
[2009年09月09日 12:38:10.442808] Signal : cid=3BB3, lac=0D48
[2009年09月09日 12:38:13.020126] Signal : cid=3BB3, lac=0D48
[2009年09月09日 12:40:25.772918] Signal : cid=3BB3, lac=0D48
[2009年09月09日 12:40:28.620096] Signal : cid=3BB3, lac=0D48
[2009年09月09日 12:41:17.557676] Signal : cid=3BB3, lac=0D48
[2009年09月09日 12:41:20.404582] Signal : cid=3BB3, lac=0D48
Then you have the bug (trying to connect to GSM every second!)
regards
AstHrO
Here's KaZeR's script :
--------------------------
#!/usr/bin/python
import dbus
import dbus.glib
import gobject
import datetime
 
def onNetworkStatus(status ):
 print '[%s] Signal : cid=%s, lac=%s' % 
(datetime.datetime.now(),status['cid'],status['lac'] )
bus = dbus.SystemBus();
bus.add_signal_receiver( onNetworkStatus,
 "Status",
 "org.freesmartphone.GSM.Network",
 "org.freesmartphone.ogsmd",
 "/org/freesmartphone/GSM/Device" )
gobject.threads_init()
dbus.glib.init_threads()
main_loop = gobject.MainLoop()
main_loop.run()
--------------------------