[ANNOUNCE] xf86-video-ati 6.9.0

Thu Jun 26 17:00:58 PDT 2008

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Version 6.9.0 of the radeon driver. Lots of stuff since 6.8.0
In addition to lots of bug fixes there are several major new features:
- - Improved EXA render support for r1xx/r2xx cards
- - EXA render support for r3xx/r4xx/r5xx cards
- - Textured video support for Xv (r1xx-r5xx)
Full Changelog:
Adam Jackson (5):
 Bump CRTC size limits on AVIVO chips so 30" displays work
without tweaking.
 Add R500 unified shader register block.
 Fix R500_US_CONFIG.
 Add the R500 US index/data pair.
 Clarify R500 US setup.
Alan Coopersmith (2):
 On non-gcc compilers, use C99's __func__ instead of gcc's __FUNCTION__
 Strip ^M's from src/AtomBios/includes/ObjectID.h
Alban Browaeys (1):
 RADEON: Revert to old behavior when resetting the memmap on VT switch
Alex Deucher (178):
 RADEON: update man page with supported chips
 RADEON: fix DDC types 5 and 6
 RADEON: restore clock gating and CP clock errata on VT switch
 R100: fix render accel for transforms
 ATOM: properly set up DDIA output on RS6xx boards
 RS6xx: fix DDC on DDIA output (usually HDMI port)
 RS6xx: gpio entry for DDIA varies depending on the number of DFP ports
 RADEON: add textured video support for r1xx-r4xx radeons
 R500: fix typo in new r5xx regs
 RADEON: no textured video yet on XPRESS chips
 R300: fill in some more 3D bitfields
 R300: replace magic numbers in cache flush
 R300: clean up magic numbers in RADEONInit3DEngine
 R300/R500: clean up magic numbers in render code
 R300/R500: clean up magic numbers in textured video
 R300/R500: set the number graphics pipes properly
 R300: fix cordinate clamping in render code
 R300/R500: fix up clipping
 RADEON: Convert textured video to use pipelined uploads
 RADEON: fix clipping for textured video
 RADEON: fix textured video uploads
 R100/R200: move r100/r200 specific 3D setup into appropriate blocks
 R300+: update RADEONCP_REFRESH() to reflect new location of scissor regs
 AVIVO: make sure we select the right LUT for each crtc
 R300/R400: bump up the clip limits for textured video
 R300: fix up magic numbers in fragment program
 R500: fragment program clean up and magic number conversion
 AVIVO: disable dithering on DFPs
 RS6xx: fix typos in previous commit
 RS6xx: rework output parsing
 AVIVO: save/restore scaler regs
 fix off-by-one in last commit
 R5xx: fix register count when sending fragment program for textured video
 AVIVO: disable pageflipping on avivo chips until we have proper
drm support
 AVIVO: LVDS panels need dithering enabled
 AVIVO: save/restore regs by block
 RS4xx: enable exa render accel and textured video
 RADEON: only restore legacy dac regs on legacy radeons
 RADEON: memmap rework 1
 RADEON: use xf86SetDesiredModes() in screeninit and enterVT
 RS6xx: change isIGP checks to CHIP_FAMILY_RS690
 ATOMBIOS: fix atombios parser support on *bsd
 RADEON: fix fetching of dac2 adj values from newer bios tables
 AVIVO: Initial support for DCE 3.0 using atombios
 RADEON: option to override TVDAC adj values from bios with driver defaults
 DCE3.0: Minor fixups
 RADEON: take 2 on proper pragma pack support for bsds
 DCE3.0: add support for crtc memreq table
 AVIVO: fix up memsize detection for IGP chips
 AVIVO: don't add outputs for invalid connectors
 AVIVO: fix typo from a previous commit
 DCE3: Ignore outputs with DIN connectors for now
 RADEON: Fix crash in last commit
 AVIVO: clean up some unused variables
 RV550: MC setup is like RV515 not RV530
 DCE3: add output attribute to enable/disable coherent mode
 ATOMBIOS: enable load detection by default on both DACs
 DCE3: adjust PLL for DCE3 chips
 DCE3: enable DPMS on DIG ports
 ATOM: remove some cruft
 DCE3: add support for PCIEPHY (untested)
 RADEON: fix vblank interrupts after VT switch or suspend/resume
 RADEON: enable output attributes that require a modeset immediately
 R3xx/R5xx: enable blending
 R3xx: set the texture id and add some register info
 R300: setup source selects and output swizzling
 R3xx: add basic mask support
 R3xx: enable composite for non-mask cases
 R3xx: more mask work
 R3xx: attempt to setup the rasterizer properly for mask texture
 R3xx: make sure to set the FS code size correctly
 R3xx/R5xx: Fix magic numbers in vertex shaders
 R3xx/R5xx: enable VS for mask texture
 R3xx: VS WIP
 R3xx: theoretical support for component alpha
 R3xx: odds and ends...
 RADEON: make sure var is initialized properly in
RADEONAdjustMemMapRegisters()
 RADEON: fix typo in RADEONAdjustMemMapRegisters()
 R3xx: fix errant w
 R3xx: some progress
 R3xx: minor adjustments
 R3xx: get masks working and cleanup
 R3xx/R5xx: whitespace cleanup and cruft removal
 R5xx: bump tex/dst limits to 4096
 R5xx: first pass at render support (untested)
 R3xx/R5xx: remove some cruft
 R3xx: we only use 2 temps, not 3
 R3xx/R5xx: switch an ErrorF() to RADEONFALLBACK()
 R3xx/R5xx: remove extra return after last commit
 RV515: fix textured video and EXA Composite
 RADEON: fixed textured video with XAA and tiling
 RADEON: add new macros to distinguish between R3xx and R5xx 3D
 R5xx: bump textured video limits to 4096
 R3xx/R5xx: Make sure to clamp the output of the FS
 Disable the setting of HARDWARE_CURSOR_BIT_ORDER_MSBFIRST
 RS4xx: attempt to fix TMDS/DVO support
 RS4xx: attempt to set up disp/disp2 fifos correctly
 RS4xx: missed this on the last commit.
 RS4xx: more work on disp/disp2 fifo setup
 RS4xx: Revert back to previous fifo settings for now
 R3xx/R5xx: use non VAP/TCP for textured video
 R3xx/R5xx: move more VAP, etc. state setup into common init3d() function
 R3xx/R5xx: flush PVS state before enabling pvs-bypass
 RV250: disable textured video due to HW bug
 RADEON: attempt to fix lid issues
 XAA: update message about render so as to not confuse users
 AVIVO: no need to call PreinitXv() on AVIVO chips as they have no overlay
 Revert "RADEON: attempt to fix lid issues"
 RADEON: fix lid issues on AVIVO chips for real this time :)
 Revert "atombios: fixup the width/height to use the mode values
not the scrn ones"
 Revert "RADEON: remove driver rec copies of mc info, use save
rec directly"
 Revert "RADEON: memmap rework 1"
 Minor cleanup
 RADEON: add some quirks
 RADEON: warning fixes
 ATOMBIOS: Add support for DynamicClocks option
 R3xx+: EXA/textured video fixes
 R3xx+: minor textured video fixes
 R3xx+: use the right register for engine flush
 RADEON: store tcl status in driver rec
 Revert "R3xx/R5xx: move more VAP, etc. state setup into common
init3d() function"
 RADEON: cleanup
 R300+: textured video tcl cleanup
 R3xx+: tcl wip
 R3xx+: consolidate some common 3D code
 R3xx+: consolidate more tcl code
 R300+: pre-load vertex programs in init3D()
 Fix exa glyph corruption on newer chips
 R3xx+: more fixes to 2D/3D engine init
 R3xx+: fix XAA + textured video on non-TCL path
 R300+: consolidate some tcl/non-tcl paths
 R3xx+: 3D engine documentation and minor cleanups
 R300: move more common code to init3d()
 EXA: Don't wait for 3D idle after each Composite()
 R300+: properly setup vap_cntl
 fix up some things from the last commit
 R300+: move more common code into init3d()
 RADEON: decrease crtc/output verbosity
 RADEON: remove duplicate register define
 IGP: fix EXA composite corruption
 RADEON: assorted fixes
 RADEON: lock the cursors when updating
 RADEON: disable MMIO paths for EXA composite/texvid on IGP/R5xx
 RADEON: fixup ifdef from last commit
 radeon: add initial support for cloning outputs. (single-CRTC cards only)
 RS4xx: Split out RS400 and RS480 as separate families
 Add RS600 support
 R3/4/5xx: fix EXA rotation
 R3/4/5xx: fixup logic from last commit
 ATOM: Ignore invalid connector entries
 RADEON: enable cloning on multi-crtc cards
 RADEON: cleanup connection detection and remove duplicate code
 ATOM: remove duplicate code
 RADEON: improve support for secondary cards
 R3/4/5xx: use get_param to get the num_gb_pipes from the drm
 RADEON: only attempt to read vbios from legacy ISA space if it's primary
 R1xx: Gamma fixes for overlay
 ATOM: fail of we are not able to get a bios image
 RADEON: don't enable legacy bios table based init yet
 RADEON: add Int10 option
 RADEON: update RADEONGetVRAMType() for newer chips
 ATOM: disable TV-out for now
 RADEON: minor cleanups
 RS4xx: RC410 chips are actually RS400 based
 R5xx: fix RADEONSetAgpBase() for R5xx chips
 R3xx: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT
 Bump for 6.9.0rc1 release
 RADEON: man page updates
 radeon: X_ERROR -> X_WARNING for num gb pipes
 RADEON: fix read past the end of an array
 0x1002 0x5657 is actually RV410
 RADEON: adjust randr crtc/output prepare/commit ordering
 IGP: attempt to fix VGA on IGP chips
 RADEON: cleanups
 RADEON: warning fix
 bump for rc release
 RADEON: adjustments to Jerome's last commit
 Bump for 6.9.0 release
Avi Rozen (1):
 RADEON: fix lockup on start
Brad Smith (2):
 RADEON: fix copy/paste error in accel code
 RADEON: sys/endian.h needs sys/types.h on BSDs
Corbin Simpson (1):
 RADEON: missing stdint.h includes
Dave Airlie (43):
 r500: initial rotate support - not fully working yet.
 r500: add textured video Xv adapter support
 r500: convert fragprog to use register values
 rs690: initial rs690 rotate
 rs690: initial textured video support
 fixup check for EXA composite pointed out by Alan Swanson
 regs: fix spelling mistake
 regs: fix spelling properly
 RADEON: fix tiling/interlaced interaction with randr 1.2
 xv: fixup XAA on r500 textured video
 radeon: the 0x5974 appears to be a mobility chip...
 R5xx: fix typ in r5xx render accel
 r500: make it work from startup.
 r300: don't bother with VAP/TCL for render.
 radeon: size bios to max of bar vs 64k.
 r500/r600: fix rotation to fill screen
 atombios: fixup the width/height to use the mode values not the scrn ones
 radeon: split quirks into separate function and new quirk for IBM RN50
 radeon: use correct DDC interfaces so quirks get applied
 Revert "Revert "atombios: fixup the width/height to use the mode
values not the scrn ones""
 atombios: fix the dual-head hopefully.
 radeon: zaphod fix for cursor on second head
 radeon: zaphod fixes for pciaccess not allowing multiple MMIO maps
 radeon: fix EXA pixmap offset on zaphod
 radeon: zaphod: fix render accel for EXA
 radeon: fix textured-xv on zaphod
 avivo: fix zaphod cursor in theory
 radeon: fix zaphod EXA with texture video
 radeon: rs485 vs rs485m.. mobile? non-mobile? bi?
 radeon: fix set_cursor_colours remove fb offset
 atombios: for LVDS set use ref div as per legacy
 radeon: fix surface access on avivo chips.
 radeon: fix typo in memory calcs
 atombios: fixup atombios bitfields for endianness
 radeon: add lots of endian bits into the atombios parser
 atom: fixup includes in cd operations to get correct endian bits
in atombios.h
 atom: fix another endian define
 Revert "ATOM: disable TV-out for now"
 r600: don't add fb offset here to make shadowfb work.
 atombios: use MMIO from the entity not the info
 legacy: use entity MMIO for dpms as this can crossover between
zaphod infos
 ati: hopefully fix byteswap mess for those other OSes.
 Revert "Revert "ATOM: disable TV-out for now""
Doug Chapman (1):
 Bug #14826: Fix a bogus check around xf86SetOperatingState.
Egbert Eich (1):
 Change RMX code to follow the programming algorithm suggested by ATI.
George Sapountzis (7):
 drop mach64 (build system)
 drop mach64
 drop r128 (build system)
 drop r128
 add warning for mach64
 add warning for r128
 radeon: pass distcheck
Jerome Glisse (1):
 radeon: flush & wait for 2d & dma idle after 2d blit
Jiří Paleček (2):
 RADEON: PLL tweaks
 RADEON: remove extraneous line from new pll code
Julien Cristau (1):
 Add a test for __GLIBC__ to CD_Common_Types.h.
Maciej Cencora (1):
 RADEON: remove driver rec copies of mc info, use save rec directly
Matt Turner (4):
 Fix a few warnings
 Properly fix uninitialized variables warnings
 Enable BSR in Log2 functions
 Replace CARD{8,16,32} with uint{8,16,32}_t
Matthieu Herrb (1):
 Makefile.am: nuke RCS Id
Michael Babej (1):
 r600: fix vt switch issue
Michel Dänzer (7):
 radeon: Fix typo flagged by gcc -Wall.
 Fix 16 bit packed YUV XVideo playback on big endian systems with
DRI disabled.
 Handle EXA coordinate limits more cleverly.
 Include config.h, so FGL_LINUX can actually be defined when it's tested...
 Increase default CP timeout.
 Reinstate CARD* types that are part of external interfaces.
 Call DRM_IOCTL_MODESET_CTL ioctl to avoid problems with DRM post
vblank-rework.
Owen Taylor (3):
 Radeon: Omit mask coordinates
 Turn on wrapping when repeating on R100 + R200
 Emulate repeats by drawing in tiles
Owen W. Taylor (2):
 R3xx/R5xx: Fix pitch and clamp mode for repeating textures
 Fix rendering of transformed sources for REPEAT_NONE with EXA on >= R300.
Paulo Cesar Pereira de Andrade (2):
 Ensure symbols used by other modules are visible.
 Compile warning fixes.
Peter Zubaj (1):
 R300: Fix clamping and pitch for textured video
Stephan Wolf (1):
 R3xx+: further fix for IGP chips
Tilman Sauerbeck (1):
 R3xx/R5xx: fix up a8-src-something_with_colors
Tobias Diedrich (1):
 R200/R300: fix gamma setup for overlay
thegraze (1):
 ATOM: add support for DragonFlyBSD
git tag: xf86-video-ati-6.9.0
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-ati-6.9.0.tar.bz2
MD5: afa4873f58ae6fa31fedeb9ed31531db xf86-video-ati-6.9.0.tar.bz2
SHA1: 558f94b76e1b4c3c4429ab1fdc3e3c8523e414dc xf86-video-ati-6.9.0.tar.bz2
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-ati-6.9.0.tar.gz
MD5: 11dd6a53fd98aa32c6f9b518e841df9c xf86-video-ati-6.9.0.tar.gz
SHA1: 69a7ea39fa3f54b87fee577475ebfc7857525566 xf86-video-ati-6.9.0.tar.gz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFIZC2Bm07k+YR03kARAqL+AJ4uM414IUEzK91vBAEqnYT+U+X9OACeInWo
p0JQGfFhuX7ySLYwHv8Obws=
=5Fih
-----END PGP SIGNATURE-----