[WriteLog] SETUP - CW/RTTY/SSB MESSAGE FORMAT

Sun Mar 2 00:33:08 EST 2014

John,
There are several options for sending the serial number from F2, depending 
upon what you want for the output.
A plain '%' sign in the macro will send the exact serial number as indicated 
by WL.
A '%n', where n is from 1 -5, will send the serial number with required 
number of leading "T" characters in Morse or "0" digits in RTTY, to make it 
a n digit number. Use this for contests where a three digit serial number 
is required.
A '%N' followed b an optional digit n will send the serial number as a n 
digit number, but will use cut numbers if you have a [Cut-Numbers] section 
defined in your writelog.ini file. For example, 0=T will send the letter T 
instead of a 0 for as many places as required to make a three digit number. 
But, it will also send T anywhere if finds a 0 in the serial number. So the 
number 1008 will be sent as 1TT8. I don't particularly like receiving that 
so I never send it, but your opinion may differ.
73,
Gary AL9A
-----Original Message----- 
From: JOHN POWELL
Sent: March 01, 2014 4:25 PM
To: writelog at contesting.com
Subject: [WriteLog] SETUP - CW/RTTY/SSB MESSAGE FORMAT
Hi Fellow Writelog Users.
I have a problem- after a number of years I reinstalled WL again on a new 
Hard Drive and have run into a problem, or two.Have largely resolved the 
more demanding (mentally ones !!) and am keen to clear the remaining one, 
being inputting the correctly formatted data into the F2 MESSAGE box". I 
have mislaid my original installation notes an would be obliged if some kind 
person would advise the inputting data format for the following :-
- data relative to an RST, Ascending Serial Number situation, e.g. 599001, 
599002, etc.
Thanks in advance to your assistance, which will be really appreciated.
73
John Powell. ZL1BHQ
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/