[WriteLog] Icom CT-17 with Writelog

Thu Mar 22 12:41:22 PDT 2012

Sorry then I don't know.I use DDU, with my flex ,7700 and write log...
GL 
Len
On 2012年03月22日, at 3:10 PM, Andre VanWyk wrote:
> Understood, but in the Writelog port setup, you cannot duplicate a port. So, 
> lets say you have radio one in the 1st window set to COM port 1, (where the 
> CT-17 is connected to) and radio two in the 2nd window, you cannot name it 
> COM port 1 again. Writelog will not allow it.
>> So, how do you route the CIV from the other radios connected to the CT-17 on 
> COM1 to the other radios?
>> Andre
> NJ0F
>> --------------------------------------------------
> From: "Len Morris" <lmorris at lenmar.net>
> Sent: Thursday, March 22, 2012 2:04 PM
> To: "Andre VanWyk" <kr5dx at yahoo.com>
> Cc: <writelog at contesting.com>
> Subject: Re: [WriteLog] Icom CT-17 with Writelog
>>> Each Icom radio has its own Hex address, and the CT-17 connects to one 
>> com port.
>> Len
>>>> On 2012年03月22日, at 2:53 PM, Andre VanWyk wrote:
>>>>> Does anyone out there know of a way to use an Icom CT-17 CIV unit (with 
>>> multiple radios connected to it) with Writelog.
>>> Since there is no way to be able to assign the same com port number to 
>>> both radios, I would guess this is impossible, but there might be some 
>>> virtual comport / bridging software out there?
>>> Any help would be appreciated.
>>>>>> 73
>>> Andre NJ0F
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web: http://www.writelog.com/
>>>> Len Morris VA3LM/VE3FJB
>> lenmorris at lenmar.net
>>>>>>>>>>>>>>>>> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/

Len Morris VA3LM/VE3FJB
lenmorris at lenmar.net