[WriteLog] FSK via WL/MMTTY

Sun Sep 19 22:13:04 PDT 2010

Dick,
 >> I re-sequenced all COM ports so they were addressed COM8 or below,
 >> but I am still unable to generate FSK. (Again, MMTTY works fine
 >> standalone.)
Are you using the custom EXTFSK driver with RigExpert and MMTTY?
If so, the MMTTY plug-in for WriteLog does not support EXTFSK and
that may be your problem.
73,
 ... Joe, W4TV
> ----- Original Message -----
> From: "Dick Flanagan"<dick at k7vc.com>
> To:<writelog at contesting.com>
> Sent: September 19, 2010 5:46 PM
> Subject: Re: [WriteLog] FSK via WL/MMTTY
>>>> Thanks, Wayne, and to others who responded privately. I am still
>> unable to generate FSK via WL/MTTY from my USB-connected RigExpert Plus.
>>>> I re-sequenced all COM ports so they were addressed COM8 or below,
>> but I am still unable to generate FSK. (Again, MMTTY works fine
>> standalone.)
>>>> I have my FSK port (COM6) selected in the Rttyrite Ports menu and I
>> tried it both with and without selecting Software Generated FSK via TxD.
>>>> The instructions for installing the WL/MMTTY plug-in said to ignore
>> error messages, but I think one may be relevant (DUH!). When I fire
>> up the WL RTTY window, there is a small windows in the top left of
>> the window that says: "Initializing MMTTY. Please wait." Then a
>> small error window crops up that says
>> "ERROR: UserPara.INI*%&^@#$%&^*(" The garbage is real. It looks
>> like an un-terminated message string. I respond "OK" to that window
>> and MMTTY seems to initialize fine.
>>>> I really hate feeling stupid like this, especially if this is a known
>> limitation of WL. There is noting like spending over 300ドル for an
>> interface that doesn't work with my favorite contest logger! :(
>>>> Is there any other information I can provide to help someone bail me
>> out? I'm running Windows XP.
>>>> Dick
>>>> At 07:41 AM 9/19/2010, Wayne wrote:
>>> This does work. You need to use a com port below com8 even though both
>>> Writelog and MMTTY can use ports higher than Com8. Seems the plugin can
>>> not handle ports above Com8.
>>>>>> 73
>>>>>> Wayne WA1PMA
>>>>>> On 9/18/2010 11:46 PM, Dick Flanagan wrote:
>>>> I am trying to enable FSK via the latest WL (V10.79) and MMTTY
>>>> plug-in (V13). I am using a RigExpert Plus connected to computer via
>>>> USB port. Standalone MMTTY (V1.66G) works fine.
>>>>>>>> I have configured Rttyrite to use the correct USB/FSK port and
>>>> selected Software Generated FSK via TxD.
>>>>>>>> The WL/MMTTY settings TX window shows Sound only, with both FSK
>>>> options grayed out. Transmitting gives me tone only, no
>>>> diddle. Again, standalone MMTTY works fine.
>>>>>>>> Shouldn't the latest WL be able to handle this?
>>>>>>>> Dick
>>>> --
>>>> Dick Flanagan K7VC
>>>> dick at k7vc.com
>>>> --
>> Dick Flanagan K7VC
>> dick at k7vc.com
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>