Nick, John, While the CT-17 will support multiple radios with a different CI-V address, I do not believe Writelog will support issuing commands on the same Com port with the different CI-V addresses. You can select only one radio "type" for that Com port. 73, George .. W1ZT At 02:19 AM 2/14/2004, Nick Kail wrote: >All you need to change on your 746 is the CI-V address to make sure it isn't >the same as your 756 >>73's >Nick >2E0MLR >>-----Original Message----- >From: writelog-bounces at contesting.com >[mailto:writelog-bounces at contesting.com] On Behalf Of John Hoaglun >Sent: 14 February 2004 03:35 >To: writelog at contesting.com >Subject: [WriteLog] Icom ICOM CT-17 >>I currently own an Icom 756 and I am in the process of acquiring an Icom >746. Currently I use an Icom CT-17 multi port interface with my 756 which >works fine with Writelog. >>Can I use my currently CT-17 (it is a 4 port box) to interface my 756 and my >746 using a signal serial port with Writelog? >Or will I need another CT-17 (original or clone) to get rig control/data >between my 746 and my pc? >>I would prefer to use a single CT-17 since it was design to connect to >several radios at one time. I would hate to have to give up another serial >port if it can be avoided. >>73 >>John Hoaglun - MCSE >KC0LBT - EN35ib >http://www.hoaglun.com >>_______________________________________________ >WriteLog mailing list >WriteLog at contesting.com >http://lists.contesting.com/mailman/listinfo/writelog >WriteLog on the web: http://www.writelog.com/ >>_______________________________________________ >WriteLog mailing list >WriteLog at contesting.com >http://lists.contesting.com/mailman/listinfo/writelog >WriteLog on the web: http://www.writelog.com/