> -----Original Message----- > From: writelog-admin@contesting.com > [mailto:writelog-admin@contesting.com]On Behalf Of George Beasley > Sent: Tuesday, April 02, 2002 12:26 AM > To: clive@gw3njw.fsworld.co.uk; writelog@contesting.com > Subject: RE: [WriteLog] Sound card/DVK problem >>> Wrong, Wrong, Wrong, > RTFM. It needs to be switched to work. > Use a transistor to do it. > it works fine. > I did RTFM and you don't understand what I am saying. EVERYTHING EXCEPT the sound input works fine. I know that when Pin 9 is switched for operation that the mic on front is muted. I know that pin 111 is SUPPOSED TO BE the input signal and NO SWITCHING of ANY kind is used here. This is an ANALOG audio input. What you do not seem o understand is that this line is NOT CONNECTED in MY XCVR, although it is SUPPOSED to be. I could put 10 volts of audio in here and get NOTHING UNDERSTAND NOW? I read the manual but you did not read my post. > 73 de, > George 5B4AGC > Web Page http://www.qsl.net/5b4agc >>> -----Original Message----- > From: writelog-admin@contesting.com > [mailto:writelog-admin@contesting.com]On Behalf Of Clive Whelan > Sent: 01 April 2002 20:00 > To: writelog@contesting.com > Subject: Re: [WriteLog] Sound card/DVK problem >>> GilBaronW0MN wrote: > > I am ALMOST SURE your problem is the WORTHLESS TS870 accessory > socket. In > > MANY of these radio the sound input simply DOES NOT WORK! > > >>> Noted, thanks >>> 73 >>> Clive > GW3NJW > gw3njw@gw7x.org > Contest Cambria-http://www.gw7x.org >>> _______________________________________________ > WriteLog mailing list > WriteLog@contesting.com > http://lists.contesting.com/mailman/listinfo/writelog >> _______________________________________________ > WriteLog mailing list > WriteLog@contesting.com > http://lists.contesting.com/mailman/listinfo/writelog >